Common Mistakes: Avoiding Cylinder Head Damage In Subaru EJ 253 Engines

Common Mistakes: Avoiding Cylinder Head Damage In Subaru EJ 253 Engines

Discovering cracked cylinder heads in SUBARU EJ 253 engines can often be attributed to a cascade of seemingly minor errors, the most prevalent being improper oil sensor installation. As a premier converted VW-running Subaru drivetrain parts manufacturer, we understand the intricate balance and the criticality of each component within an engine.

This blog post delves into the common errors that lead to these costly cylinder head damages, shedding light on their long-term repercussions. Moreover, we emphasize the pivotal role of correct oil sensor installation. We introduce our oil pressure sensor repair kit as a proactive solution to prevent such issues and save enthusiasts from significant repair expenses.

Over-Tightening Woes

Over-tightening, a seemingly innocuous action, emerges as a primary culprit behind the perilous scenario of cracked cylinder heads in Subaru EJ 253 engines. The consequential damage often arises when the oil pressure sensor is affixed with excessive force.

This practice subjects the delicate cylinder head to undue stress, resulting in hairline fractures or complete cracks over time. Sadly, this mistake, while seemingly inconsequential during installation, reverberates profoundly within the engine, causing disruptions that are not immediately apparent but progressively worsen with time.

Recognizing the vulnerability of these engines and the intricate balance of components, it becomes imperative to navigate the fine line between securing the oil sensor adequately and avoiding detrimental over-tightening.

Neglected Maintenance

Amidst the flurry of engine maintenance tasks, installing an oil pressure sensor might seem routine or inconsequential to some. However, this perception belies this component’s critical role in the intricate machinery of Subaru EJ 253 engines.

Ignoring or neglecting the manufacturer’s recommended installation guidelines for the oil sensor becomes a precarious gamble. It paves the way for potentially devastating consequences, including cracked cylinder heads.

Also Read: 5 Reasons Why You Need A Short Shifter Assembly For Your Vanagon

Failure to adhere to the prescribed torque specifications, improper tools, or overlooking the necessity of precision during installation can all contribute to the silent but severe damage that may unfold within the engine. The ramifications of such oversight might manifest slowly but inevitably surface over time, leading to costly repairs and a compromised engine.

Lack Of Precision

Precision in engine maintenance is indispensable, especially concerning placing critical components like the oil pressure sensor. Misalignments or improper placements of this sensor can spell disaster for the Subaru EJ 253 engines.

A seemingly minor deviation from the designated positioning can set in motion a domino effect of complications, eventually resulting in cracked cylinder heads. Such misalignments disrupt the delicate equilibrium within the engine, causing uneven stress distribution on the cylinder head.

Over time, this stress accumulates, causing fractures and fissures that culminate in irreversible damage. It is imperative to comprehend that even the slightest discrepancy in sensor placement can precipitate severe repercussions, highlighting the significance of precision in engine maintenance and component installation.

The Oil Pressure Sensor Repair Kit Solution

Amidst the distressing prospect of cracked cylinder heads in Subaru EJ 253 engines, hope emerges in the oil pressure sensor repair kit. This meticulously crafted solution presents a glimmer of respite for enthusiasts grappling with the aftermath of over-tightening issues or misaligned oil pressure sensors.

Engineered with precision and an acute understanding of engine mechanics, this oil pressure sensor repair kit promises a seamless resolution without laborious engine disassembly. By integrating a specialized repair insert, drill, drill stop, tap, and detailed, step-by-step instructions with vivid photographs, this kit empowers users to rectify cylinder head damage in a single afternoon.

It saves valuable time and rescues enthusiasts from the exorbitant costs typically associated with traditional repair methods, offering a pragmatic and cost-effective solution to a potentially catastrophic problem.

These features make this oil pressure sensor repair kit a must-have for Subaru EJ 253 engine owners and mechanics alike. With easy-to-follow instructions, reliable results, and unbeatable convenience, you can rest assured that your engine is in good hands. Get yours today!

About Specialised Parts

Specialised Parts is your ultimate destination for top-notch Subaru drivetrain components tailored for converted Volkswagens. As a foremost premium supplier and manufacturer specializing in VW-running Subaru drivetrain auto parts, we take pride in our track record of earning the trust and loyalty of numerous customers. If you’re seeking superior Subaru drivetrain conversion auto parts, your search ends here.

Reach out to us today and experience the pinnacle of quality and expertise.

Transform Your Mid-Engine With The Subaru 4EAT 2WD Conversion Kit

Transform Your Mid-Engine With The Subaru 4EAT 2WD Conversion Kit

If you’re a Volkswagen or any other mid-engine conversion project enthusiast with a thirst for power and performance, you might be eyeing Subaru’s renowned 4EAT automatic transmission for its reliability and versatility. As an experienced Volkswagen-running Subaru drivetrain auto parts manufacturer and supplier, we have a game-changing solution for you – the Subaru Automatic Transmission 4EAT 2WD Conversion Kit designed for mid-engine applications.

In this blog post, we’ll delve into the details of this conversion kit, explore its benefits, and explain why it’s a must-have for anyone looking to take their Volkswagen or any other mid-engine conversion project to the next level.

Unleash The Potential

The Subaru 4EAT 2WD Conversion Kit is a masterpiece that allows you to convert your all-wheel-drive (AWD) Subaru 4EAT automatic transmission into a two-wheel-drive (2WD) powerhouse. This transformation is nothing short of a game-changer for your Volkswagen or any other mid-engine, offering a remarkable boost in performance and versatility.

Let’s dive deeper into what this conversion kit has to offer.

Conversion Components

At the heart of the Specialised Parts conversion kit lies its meticulously designed components. Here’s what you’ll find inside the kit:

Large Back Cover Plate

This plate is precision-engineered with 4 bolt holes that can be used to adapt and mount the transmission, ensuring a seamless integration of your Subaru transmission into your Volkswagen or any other mid-engine conversion project. The result is a conversion that not only performs exceptionally but looks the part too.

Also Read: 5 Reasons Why You Need A Short Shifter Assembly For Your Vanagon

Small AWD Clutch Solenoid Passage Cover Plate

The small details matter when it comes to performance, and this plate is no exception. It’s designed to fit flawlessly, ensuring a leak-free conversion that can stand the test of time.

By-Pass Resistor

To further streamline the conversion process, the kit includes a bypass resistor that allows you to splice into the AWD clutch solenoid wires with ease. This ensures a smooth transition from AWD to 2WD without any hitches.

Pair Of 100 mm Axle Flanges

These flanges are crucial for the transmission’s functionality, ensuring that the power is efficiently transmitted to your mid-engine.

Why Should You Choose Our Kit?

There are several reasons why the Specialised Parts’ Subaru 4EAT 2WD Conversion Kit stands out:

  • Precision Engineering: The kit is designed with meticulous attention to detail, guaranteeing a smooth and trouble-free installation. You can trust that the components will fit perfectly.
  • Maintains Original Rotation: With Specialised Parts, you won’t have to worry about any loss in performance. The conversion maintains the original rotation to the output axles, preserving the Subaru 4EAT’s inherent capabilities.
  • Expertise You Can Trust: We have established ourselves as a reputable supplier of auto parts, our expertise shines through in this conversion kit. You can be confident that you’re getting a high-quality product that will stand the test of time.
  • Unmatched Value: At just $1,300.00, this conversion kit represents an exceptional value for those seeking to enhance their vehicle’s performance. You’ll get more than your money’s worth in increased power and potential.

Benefits Of The Conversion

The benefits of converting your mid-engine to a 2WD mid-engine setup with the Specialised Parts Subaru 4EAT 2WD Conversion Kit are numerous:

  • Enhanced Performance: Experience improved acceleration, traction, and maneuverability thanks to the added power of the Subaru 4EAT transmission.
  • Weight Reduction: Shedding the weight of the AWD system not only boosts performance but also improves fuel efficiency, making your vehicle more economical.
  • Versatile Applications: This conversion kit is perfect for various mid-engine applications. Whether you’re looking to build a track-ready beast or an off-road monster, this kit will serve your needs.
  • Easy Installation: With the carefully designed components and detailed instructions, installation becomes a breeze.

Overall, the Subaru 4EAT 2WD Conversion Kit is a game-changing addition to your mid-engine conversion project that offers exceptional value, performance, and versatility. With precision engineering, expert craftsmanship, and unbeatable results, this conversion kit will unlock the true potential of your vehicle.

Say goodbye to the limitations of an AWD setup and hello to the power of a 2WD mid-engine. With this kit, you can conquer the road or the track with newfound confidence.

So, why wait? Upgrade your Volkswagen or any other mid-engine today and experience the Specialised Parts difference. Your journey to automotive excellence begins here.

About Specialised Parts

Specialised Parts is a reliable dedicated source for Subaru drivetrain components in converted Volkswagens. We are a leading premium converted VW-running Subaru drivetrain auto parts supplier and manufacturer. If you are looking for good quality products, such as the Subaru 4EAT 2WD Conversion Kit, contact us today.

Nighttime Driving Made Easy: Upgrading Your Vanagon’s Headlamps To LED

Nighttime Driving Made Easy: Upgrading Your Vanagon's Headlamps To LED

When enhancing your nighttime driving experience, upgrading your Volkswagen Vanagon’s headlamps to LED Low Beam Headlamps is a game-changer. Not only does it significantly improve visibility on the road, but it also adds a touch of modernity to your classic ride.

In this blog, we’ll delve into the benefits of LED headlamp conversions for your Vanagon and provide you with expert insights on how to undertake this upgrade.

Plus, for those who have already improved their Vanagon’s performance, we’ll explore the world of converted VW running Subaru drivetrain parts manufacturers, offering you a comprehensive approach to elevating your driving experience.

Enhanced Visibility: See Better At Night

Upgrade your Vanagon’s headlamps to LED Low Beam Headlamps, and you’ll experience a dramatic improvement in nighttime visibility. The brilliance of LED technology is unparalleled, offering a crisp, clear beam of light that cuts through the darkness like a beacon. Whether navigating winding country roads or bustling city streets, these LED headlamps will ensure you see every detail with precision.

One of the key benefits of LED Low Beam Headlamps is their ability to mimic natural daylight, reducing eye strain and fatigue during long night drives. You’ll notice the road ahead more clearly, spot potential hazards sooner, and have greater confidence in your night driving abilities.

Don’t compromise on safety – switch to LED Low Beam Headlamps today and illuminate the path to worry-free nighttime travel.

Improved Safety On Dark Roads

Safety is paramount in nighttime driving, and LED Low Beam Headlamps are your ticket to a safer journey. The bright, focused beam of LED lights enhances your visibility and ensures that you’re more conspicuous to other drivers. This added visibility reduces the risk of accidents, making your nighttime adventures safer for everyone on the road.

LED Low Beam Headlamps are known for their rapid response time, instantly reaching full brightness when turned on. This quick reaction time is crucial when encountering sudden obstacles or wildlife on dark, winding roads.

Moreover, these headlamps have a longer lifespan than traditional halogen bulbs, meaning you’ll spend less time and money on replacements. Upgrade to LED Low Beam Headlamps and take a proactive step towards safer nighttime driving.

Also read: Choosing The Right High-Capacity Oil Pan For Your Subaru EJ Series

Energy-Efficient Lighting Solution

Say goodbye to energy waste and hello to efficiency with LED Low Beam Headlamps. These cutting-edge headlamps consume significantly less energy than their halogen counterparts, putting less strain on your vehicle’s electrical system and reducing fuel consumption.

By switching to LED, you’re benefiting from improved illumination and contributing to a greener, more sustainable future.

LED Low Beam Headlamps also boast a longer lifespan, meaning fewer replacements and less waste in the long run. Their energy-efficient design is a win-win, providing brighter, more reliable lighting while being eco-conscious and budget-friendly.

So, if you’re looking for an easy way to reduce your carbon footprint and your vehicle’s operating costs, LED Low Beam Headlamps are the way to go.

Easy Installation And Upgraded Look

Upgrading your Vanagon’s headlamps to LED Low Beam Headlamps is a breeze, thanks to using original VW mounting brackets. This means you can make the switch without complex modifications or additional hardware.

The process is straightforward, ensuring a hassle-free installation that even those with limited automotive experience can handle.

You will enjoy the functional benefits of LED Low Beam Headlamps, and your Vanagon will also sport a modern and stylish look. These headlamps’ sleek, contemporary design will give your vehicle a fresh and updated appearance.

So, not only are you improving your night driving experience, but you’re also enhancing your Vanagon’s aesthetics effortlessly.

Savings With LED Headlamp Efficiency

LED Low Beam Headlamps not only save energy but also save you money in the long run. Their extended lifespan means fewer replacements, reducing maintenance costs.

Additionally, their energy efficiency translates into fuel savings over time, making your journeys more cost-effective. These headlamps are an investment that pays for itself in terms of both performance and savings.

Furthermore, choosing LED Low Beam Headlamps reduces overall energy consumption and greenhouse gas emissions. Being environmentally responsible while enjoying financial benefits is a win-win situation. Make the switch to LED Low Beam Headlamps today, and you’ll enhance your nighttime drives while also reducing expenses and your environmental footprint.

About Specialised Parts

Experience the expertise of Specialised Parts: your dedicated source for Subaru drivetrain components in converted Volkswagens. We are proud to have garnered the trust and loyalty of countless customers. Are you looking for top-tier Subaru drivetrain conversion auto parts? Look no further. Contact us today.

Salvage Your Engine With The Subaru, Nissan, And Infiniti Cylinder Head Bolts Threads Repair Kit

Salvage Your Engine With The Subaru, Nissan, And Infiniti Cylinder Head Bolts Threads Repair Kit

Are you familiar with that sinking feeling when you accidentally strip the threads on your engine’s cylinder head bolts? It’s a common headache that many car enthusiasts and mechanics encounter when removing or installing cylinder head bolts.

Fortunately, there’s a solution that can save the day and help you avoid the costly replacement of your cylinder block. As an experienced Volkswagen-running Subaru drivetrain auto parts manufacturer, we’re excited to introduce the Subaru, Nissan, and Infiniti Cylinder Head Bolts Threads Repair Kit – a game-changer for anyone looking to repair those damaged threads and restore their engine’s integrity.

The Stripped Thread Dilemma

Stripped threads on cylinder head bolts are a surprisingly common issue, and they can happen for various reasons. Over-torquing during assembly, corrosion, age-related wear and tear, or improper tools can all contribute to thread damage.

When this happens, it’s crucial to address the problem promptly to prevent further complications, such as coolant leaks, reduced engine performance, or even catastrophic engine failure.

Stripping out the threads on your engine’s cylinder head bolts can be a major setback. It can lead to expensive repairs, potential engine damage, and the frustration of not being able to enjoy your vehicle. But fear not, as we have the perfect remedy for this all-too-common issue.

Also Read: Enhancing Traction: Torsen Style Limited Slip Differential Assembly For VW And Audi 6-Speed Transmissions

Reliable Repair Kit

Our Cylinder Head Bolts Threads Repair Kit is designed to empower both seasoned mechanics and DIY enthusiasts. You don’t need to be a professional to use it effectively. With basic tools and some essential skills, you can perform the repair yourself, saving valuable time and money.

What’s Included In The Kit?

This kit is tailored for engines that utilize the 11mm diameter x 1.25 thread pitch cylinder head bolts. We understand that precision is key when it comes to engine repairs, so we’ve included components specially designed for this application.

Let’s take a closer look at what you’ll find in the kit.

  • 15 Stainless Steel Inserts (11mm x 1.25 x 33mm): These high-quality inserts are the heart of the repair kit. They’re designed to restore the damaged threads to their original strength, ensuring a secure and lasting fix.
  • 1 Extra-Long Drill Bit (200mm): The 200mm drill bit is longer than standard ones, making it ideal for reaching deep into the cylinder head without the need for extensions. Say goodbye to the hassle of measuring and adjusting your drilling depth.
  • 1 Drill Stop: A drill stop is a handy tool that prevents you from drilling too deep, ensuring a precise and safe repair process—no more guesswork or worrying about damaging the engine further.
  • 1 Extra-Long Thread Tap (150mm): The extra-long thread tap is designed to match the inserts perfectly. Its extended length makes tapping the new threads a breeze, even in tight spaces.
  • 1 Insert Installing Tool: This tool is a valuable addition to the kit, facilitating the smooth insertion of the stainless steel inserts into the repaired threads.

Why Should You Use This Kit?

The Subaru, Nissan, and Infiniti Cylinder Head Bolts Threads Repair Kit is your lifeline when faced with stripped threads on your engine’s cylinder head bolts. Whether you’re a professional mechanic or a passionate DIYer, this kit provides the means to salvage your engine and get back on the road with confidence.

We take pride in the precision and quality of our repair kit components. The stainless steel inserts included are crafted to exact specifications, ensuring a snug fit and long-lasting repair. Stainless steel is an ideal choice because it’s corrosion-resistant, which means your repair will stand the test of time, even in challenging automotive environments.

Don’t let stripped threads bring your engine to a standstill. Invest in our repair kit today and enjoy the satisfaction of a job well done. Say goodbye to costly replacements and hello to a revitalized engine that’s ready to roar once more.

About Specialised Parts

If you are looking for reliable Subaru drivetrain components in converted Volkswagens and repair kits, you should look no further than Specialised Parts. We are proud to have garnered the trust and loyalty of countless customers.

Contact us today to explore our products and get more information.

5 Reasons Why You Need A Short Shifter Assembly For Your Vanagon

5 Reasons Why You Need A Short Shifter Assembly For Your Vanagon

Are you a proud owner of a converted Volkswagen, now equipped with a Subaru drivetrain? If so, you’re undoubtedly no stranger to the thrill of a unique and powerful driving experience. However, even the most exceptional vehicles can benefit from that extra edge. This is where the Short Shifter Assembly comes into play.

As a leading name among converted VW-running Subaru drivetrain parts manufacturers, we’ve crafted this assembly to bring you five compelling reasons why it’s an absolute must-have for your beloved Vanagon. Prepare to elevate your shifting game and redefine your driving pleasure.

Precision And Confidence

Precision is crucial when it comes to driving; it can be the distinction between executing a seamless, well-controlled maneuver and making a clumsy, uncertain shift. This is precisely where the Short Shifter Assembly comes into play as your trusted companion on the road. Crafted with meticulous engineering, this assembly redefines your gear-shifting experience.

You will be able to handle vague gear engagement or hesitant transitions. Every shift becomes an art, a precise movement that instills confidence in your every drive. The well-designed components work harmoniously to deliver seamless gear changes, allowing you to navigate corners, accelerate onto highways, and conquer challenging terrains with a newfound mastery.

Smoother Transitions

Picture this: The road stretches ahead, and you’re ready to embrace the journey. As you grip the shifter, you can feel the difference. The Short Shifter Assembly ensures your gear transitions are as smooth as the road. This assembly minimizes friction by optimizing the shifting mechanism with fewer high-quality components.

It reduces play, creating a fluid connection between gears. Whether cruising through city traffic or tackling off-road trails, you’ll experience a newfound level of driving comfort. Each gear change becomes an opportunity to appreciate the artistry behind seamless mechanics.

With the Short Shifter Assembly, you’re not just changing gears but transitioning seamlessly between moments, commanding your vehicle with grace and finesse. Welcome to a world where every gear shift is a testament to the power of innovation and engineering.

Also read: Choosing The Right High-Capacity Oil Pan For Your Subaru EJ Series

Effortless Installation

Time is precious, especially when it comes to your automotive passions. The Short Shifter Assembly understands that, and has been designed to respect your time without compromising quality. The installation process is a testament to smart engineering, carefully curated components, and a comprehensive hardware package.

As a result, fitting the assembly into your Vanagon is an effortless endeavour. No more tedious hours spent deciphering complex instructions or wrestling with intricate parts. Instead, you’ll find that each component seamlessly falls into place, guided by an intuitive design that respects your DIY spirit.

With the Short Shifter Assembly, installation isn’t a hurdle—it’s a satisfying experience that leaves you ready to hit the road in no time. Because your time is best spent driving, not assembling.

Tailored For Your Vanagon

Your Vanagon isn’t just a vehicle; it’s an extension of your personality and a canvas for your automotive dreams. The Short Shifter Assembly respects this connection. Explicitly designed for converted Volkswagen-running Subaru drivetrain setups, this assembly becomes an organic part of your Vanagon’s identity.

Its compatibility isn’t just about fitting in physically; it’s about preserving the essence of your vehicle’s performance. The custom fit ensures that the assembly seamlessly integrates with your reversed Subaru transmission, honouring your chosen modifications.

Every gear change becomes a nod to the harmonious collaboration between engineering innovation and your unique automotive vision. With the Short Shifter Assembly, your Vanagon’s identity is enhanced, not compromised.

Experience The Thrill Of Driving

With every gear change, you’ll feel the adrenaline rush, the thrill of a perfectly executed shift. Whether navigating urban streets, winding country roads, or exploring off-the-beaten-path trails, the assembly infuses your drive with renewed excitement.

It’s a testament to the fact that driving is more than just a means of transportation—it’s an experience that should be cherished. The Short Shifter Assembly elevates your driving from ordinary to extraordinary, making every journey a celebration of automotive passion.

About Specialised Parts

Experience the expertise of Specialised Parts: your dedicated source for Subaru drivetrain components in converted Volkswagens. We’ve got your modified VW covered, from rebuilt engines to tailored parts. We are proud to have garnered the trust and loyalty of countless customers. Looking for top-tier Subaru drivetrain conversion auto parts? Look no further. Contact us today.

Enhancing Traction: Torsen Style Limited Slip Differential Assembly For VW And Audi 6-Speed Transmissions

Enhancing Traction: Torsen Style Limited Slip Differential Assembly For VW And Audi 6-Speed Transmissions

If you’re an avid Volkswagen (VW) or Audi enthusiast, you understand the thrill of driving these performance-focused vehicles. The harmony between power, precision, and control is what sets them apart from the ordinary.

But what if there was a way to enhance your driving experience even further?

That’s where, as an experienced Volkswagen-running Subaru drivetrain auto parts manufacturer, we can help you with our Torsen-style limited slip differential assembly. Designed specifically for VW and Audi 6-speed transmissions, this upgrade has the potential to revolutionize your vehicle’s traction capabilities.

In this blog post, we delve into what makes the Torsen-style LSD a must-have upgrade for performance enthusiasts.

Overview Of Torsen-Style LSD

At the heart of this enhancement is the Torsen (Torque-Sensing) style Limited Slip Differential. Unlike an open differential that sends power to the wheel with the least resistance, a limited-slip differential optimizes power distribution to ensure that both wheels receive an appropriate amount of torque.

The Torsen design takes this a step further by utilizing helical gears that actively vary the torque distribution between the wheels based on traction conditions. This means that even if one wheel loses grip, the Torsen differential will send more torque to the wheel with better traction, effectively minimizing wheel spin and maximizing control.

Also Read: Choosing The Right High-Capacity Oil Pan For Your Subaru EJ Series

Precise Engineering

The Torsen style Limited Slip Differential Assembly (LSD) for VW and Audi transmissions is not a one-size-fits-all solution. It has been meticulously crafted to seamlessly integrate with the 02M and 02Q transmissions, both in 2-wheel drive and 4-wheel drive configurations. This custom design ensures that the enhanced traction doesn’t come at the cost of compatibility or reliability.

The following are some of the key benefits you can enjoy by using Torsen-style LSD for VW and Audi:

Better Traction

Whether you’re navigating wet roads, uneven terrain, or even the racetrack, traction is paramount. The Torsen-style LSD provides a significant boost in traction by intelligently distributing torque to the wheels with the most grip.

This means more power is sent to the wheels that can utilize it effectively, reducing wheel spin and maximizing control. The result? A more confident and commanding driving experience, regardless of the surface.

Enhanced Acceleration

One of the key advantages of our LSD is its ability to ensure that power is efficiently transferred to the ground. With the Torsen-style assembly, you’ll experience improved acceleration as both wheels receive an appropriate amount of torque.

This translates to quicker and smoother acceleration off the line, making your VW or Audi feel more responsive and dynamic.

Better Control

Tackling corners with precision and confidence is a hallmark of high-performance driving. The Torsen-style LSD helps maintain better stability and control during cornering.

By sending more torque to the wheel with better grip, it reduces understeer and oversteer tendencies, allowing you to navigate corners with greater agility and confidence. This improved handling can lead to faster lap times and a more engaging driving experience overall.

Versatility

For VW and Audi owners with all-wheel drive (AWD) systems, the Torsen-style limited slip differential assembly offers unique benefits. While traditional open differentials might distribute power unevenly, the Torsen LSD actively manages torque distribution, ensuring each wheel gets the power it needs. This results in optimized performance in AWD configurations, making your vehicle more capable in a variety of driving scenarios.

Durability

When upgrading your vehicle’s performance components, reliability is paramount. The Torsen-style LSD is built with durability in mind. Its robust construction and high-quality materials ensure that it can withstand the rigours of spirited driving and even track use. With proper maintenance and care, this assembly can offer improved performance for the long haul.

Installation And Warranty

Adding the Torsen-style LSD to your VW or Audi is an investment in performance. The assembly includes all the necessary components for installation. However, it’s crucial to note that while the parts themselves come with a warranty, the installation costs are not covered.

This is standard practice, as installation procedures can vary, and the warranty aims to cover the quality and function of the supplied parts themselves.

Speaking of the warranty, we offer quite comprehensive warranty coverage. Wearing parts are covered for 1 year, while fixed and non-wearing parts come with a lifetime warranty. This speaks volumes about the confidence we have in our product’s durability and performance.

About Specialised Parts

Specialised Parts is a converted Volkswagen running Subaru drivetrain parts manufacturer. We offer a wide range of products, including rebuilt Subaru engines, transmissions, Torsen-style LSD, and various other specialized parts for your converted or modified Subaru-powered Volkswagen and Audi. So, if you are looking for quality Volkswagen-running Subaru drivetrain conversion auto parts, you can contact us today.

The Long-Term Benefits Of Using A Oil Pressure Sensor Repair Kit For Subaru Engines

The Long-Term Benefits Of Using A Oil Pressure Sensor Repair Kit For Subaru Engines

In the world of automotive engineering, where precision and reliability are paramount, a converted Volkswagen-running Subaru drivetrain parts manufacturer has introduced a groundbreaking solution that has captured the attention of enthusiasts and mechanics alike.

An Oil Pressure Sensor Repair Kit for Subaru Engines is a testament to innovation, offering a remedy for a common issue and a gateway to long-term benefits that extend far beyond immediate repairs. This blog post delves into the remarkable advantages this kit brings, shedding light on how it is transforming the landscape for Subaru EJ 253 engine owners.

Preserving Engine Health: The Crucial Role Of Oil Pressure Sensors

In the complex composition of engine parts, the oil pressure sensor plays a pivotal role, serving as the vigilant guardian of engine health. This small but powerful device constantly monitors the oil pressure within the engine, providing critical data that ensures the engine’s lubrication system is operating optimally.

A dip in oil pressure could spell disaster, leading to increased friction, excessive wear and tear, and potentially irreversible damage to vital engine components. This is where an Oil Pressure Sensor Repair Kit for Subaru Engines steps in, offering a lifeline to safeguard your engine’s well-being.

By addressing the common issue of cracked cylinder heads resulting from over-tightened oil sensors and failure over time on Subaru EJ 253 engines, this kit resolves the immediate problem and proactively prevents catastrophic consequences.

Innovative Repair Solutions: Unveiling The Subaru EJ 253 Sensor Kit

In engine repair, innovation shines brightest when it simplifies complex issues. The Oil Pressure Sensor Repair Kit for Subaru Engines is a testament to this principle, providing a practical and ingenious solution to the persistent problem of cracked cylinder heads in Subaru EJ 253 engines.

The kit’s core components—ranging from the oil pressure repair insert to the drill and tap—work in harmony to remedy the issue without necessitating the removal of the entire cylinder head or engine. What truly sets this kit apart is its accessibility. The repair process becomes manageable with step-by-step instructions and colour photographs, even for those with limited mechanical expertise.

Whether working on the passenger-side head with essential hand tools or delving into the driver-side head requiring additional mechanical know-how, the kit equips you with the tools and knowledge to navigate the repair confidently.

Also Read: Seamless Oil Level Monitoring Made Easy With The Subaru Oil Level Sight Glass

Elevating Longevity: Prolonging Engine Life With Sensor Repairs

Beyond the immediate repair of the oil pressure sensor lies a larger narrative of engine longevity and reliability. A well-maintained oil pressure system isn’t just a checkbox on the maintenance list; it’s a fundamental factor influencing an engine’s performance and lifespan. By addressing the issue head-on with the Oil Pressure Sensor Repair Kit for Subaru Engines, you’re taking a proactive step toward ensuring your engine’s health for the long haul.

Consider it an investment in your vehicle’s future—a relatively modest expenditure that could save you from expensive repairs. The kit’s effectiveness curtails the risk of cylinder head cracks and minimizes the likelihood of associated problems stemming from improper lubrication. By preserving proper oil pressure, you’re contributing to reduced wear, smoother operation, and a reliable engine that continues to deliver its full potential mile after mile.

Cost-Efficiency And Expertise: The Smart Choice For Subaru Enthusiasts

For those who hold a special place in their hearts for Subaru vehicles, maintaining the health of their engines is a top priority. The Oil Pressure Sensor Repair Kit for Subaru Engines emerges as the intelligent choice regarding cost and expertise. Traditional repair methods often involve significant labour hours, potentially escalating expenses considerably. In contrast, this kit is designed efficiently, enabling repairs that can be completed in a single afternoon, saving time and money.

Moreover, its user-friendly approach empowers Subaru enthusiasts of varying mechanical backgrounds to partake in the repair process. Whether you’re a seasoned DIYer or a novice looking to embark on your first engine repair journey, the comprehensive instructions and included tools simplify the task. The confidence gained from successfully restoring your oil pressure system adds to the satisfaction of being a hands-on Subaru owner, fostering a deeper connection with your vehicle.

About Specialised Parts

Specialised Parts is a converted Volkswagen running Subaru drivetrain parts manufacturer. We have everything from rebuilt Subaru engines and transmissions to specialized parts for your converted/modified Subaru-powered Volkswagen. Looking for premium Volkswagen running Subaru drivetrain conversion auto parts? Contact us today.

Choosing The Right High-Capacity Oil Pan For Your Subaru EJ Series

Choosing-The-Right-High-Capacity-Oil-Pan-For-Your-Subaru-EJ-Series

Are you considering a Subaru EJ series engine conversion for your vehicle? As a converted Volkswagen-running Subaru drivetrain parts manufacturer, we understand the importance of choosing the right high-capacity oil pan for your Subaru EJ Series engine. In this comprehensive guide, we will walk you through the essential factors to consider when selecting an oil pan that suits your specific needs.

In this blog post, you will gain valuable insights to help you make an educated choice. Prepare to uncover the ideal high-capacity oil pan solution, designed to enhance your engine’s performance and ensure its long-lasting operation.

Consider The Oil Pan Material

When it comes to choosing the right high-capacity oil pan for your Subaru EJ Series engine, the material of the oil pan plays a crucial role. It is recommended to opt for oil pans made from durable materials such as cast aluminum or steel. Cast aluminum oil pans offer excellent heat dissipation properties, ensuring that the oil stays at optimal temperature for engine performance.

Additionally, aluminum oil pans are lightweight, reducing the overall weight of the vehicle. Steel oil pans, on the other hand, provide exceptional strength and resistance to impact, making them suitable for off-road or high-performance applications. By selecting an oil pan made from reliable materials, you can ensure the longevity and robustness of your engine’s oil system.

Check Compatibility

Before purchasing a high-capacity oil pan for your Subaru EJ Series engine, it is crucial to verify its compatibility with your specific engine model. Different engine configurations and variations may require specific oil pan designs to ensure proper fitment and functionality. Check the product specifications provided by the manufacturer or consult with automotive experts to determine the compatibility of the oil pan with your engine.

It is essential to consider factors such as bolt-hole alignments, oil pick-up tube placement, and overall dimensions to ensure a seamless installation process. By confirming compatibility, you can avoid the inconvenience of purchasing an incompatible oil pan and ensure that your engine receives the optimum oiling it needs.

Also Read: How Rooftop Air Conditioning Systems Improve Vehicle Energy Consumption

Opt For Increased Capacity

One of the key advantages of selecting a high-capacity oil pan for your Subaru EJ Series engine is the ability to accommodate more oil. Increased oil capacity provides several benefits, including improved cooling and lubrication. With a larger volume of oil circulating through the engine, heat dissipation is enhanced, reducing the risk of overheating during demanding driving conditions.

Moreover, the additional oil capacity helps to maintain optimal oil pressure, even in high-performance scenarios where the engine is subjected to increased stress and load. By opting for increased capacity, you can enhance the overall performance and longevity of your Subaru EJ Series engine.

Consider Additional Features

In addition to the primary considerations, it is beneficial to explore oil pans with additional features that can further enhance convenience and functionality. Some high-capacity oil pans have built-in drain plugs in convenient locations, making oil changes more accessible and efficient.

A drain plug near the oil filter can simplify maintenance tasks and save time. Additionally, specific oil pans may have provisions for temperature sensors, allowing you to monitor the oil temperature accurately. This feature enables you to keep track of the oil’s thermal performance and take necessary measures if the temperature exceeds recommended limits.

Furthermore, magnetic drain plugs can help capture any loose metal particles that might be present in the oil, preventing them from circulating within the engine and potentially causing damage. Considering these additional features can provide added convenience and contribute to the overall health and longevity of your Subaru EJ Series engine.

About Specialised Parts

Specialised Parts is a converted Volkswagen running Subaru drivetrain parts manufacturer. We have everything from rebuilt Subaru engines and transmissions to specialized parts for your converted/modified Subaru-powered Volkswagen. Looking for premium Volkswagen running Subaru drivetrain conversion auto parts? Contact us today.

The Benefits Of Installing An Under Dash Standalone Split Electric Cooling Unit

The-Benefits-Of-Installing-An-Under-Dash-Standalone-Split-Electric-Cooling-Unit

Are you tired of sweltering heat ruining your driving experience? Look no further than the Under Dash Standalone Split Electric Cooling Unit!

In this comprehensive blog post, we will delve into the remarkable features and advantages of this versatile air conditioning system. We will also explore how we, as a leading professional converted VW-running Subaru drivetrain parts manufacturer, can assist you in integrating this cooling unit into your vehicle so you say goodbye to uncomfortable drives and embrace the refreshing breeze of a customized cooling solution.

Overview Of Under Dash Standalone Split Electric Cooling Unit

The Under Dash Standalone Split Electric Cooling Unit is a universal air conditioning system that works with virtually any vehicle. Its unique design allows for flexible installation under the dash, on the floor, roof, or even on the side of cabinets. This ensures a snug fit wherever you mount it, while the adjustable vents enable precise airflow control to circulate cool air wherever you desire it.

Also Read: High Capacity Oil Pan: What Makes It Superior To Standard Pans?

Some Features Of The Under Dash Standalone Split Electric Cooling Unit

The Under Dash Standalone Split Electric Cooling Unit boasts a range of impressive features that set it apart as a top-notch air conditioning system for your vehicle.

Let’s take a closer look at these features:

3-Speed Fan Control

This system offers a three-speed fan control feature, allowing you to adjust the airflow intensity according to your comfort preferences. Whether you prefer a gentle breeze or a powerful blast of cool air, the Under Dash Standalone Split Electric Cooling Unit can accommodate your needs.

Built-in Evaporator Core

The integrated evaporator core ensures efficient cooling performance by rapidly reducing the temperature of the circulated air. This feature guarantees that you will feel the refreshing effects of cool air in no time, even during hot summer days.

Variable Range Thermocouple Temperature Control

Achieve precise temperature regulation with the variable range thermocouple temperature control feature. This allows you to set the desired temperature and maintain a comfortable environment inside your vehicle throughout your journey.

Adjustable Air Outlets

The Under Dash Standalone Split Electric Cooling Unit offers outlets that can be easily turned and oriented to direct the airflow wherever you desire it. Whether you want the air directed towards the driver, the passengers, or specific areas in the vehicle, this customizable feature ensures everyone’s comfort.

Electric Scroll Compressor

The all-in-one electric compressor has an electric scroll compressor that delivers fast cooling capabilities. This means you don’t have to endure long waits for your vehicle to cool down; the Under Dash Standalone Split Electric Cooling Unit works quickly and efficiently.

Low Noise Operation

Say goodbye to noisy cooling systems. This unit is designed to operate with minimal noise, allowing you to enjoy a peaceful and tranquil driving experience without distractions.

Independent

One of the standout features of this cooling unit is its ability to function independently of the vehicle’s engine. With the Under Dash Standalone Split Electric Cooling Unit, you can enjoy cool air circulation without the need for the engine to be running. This means you can experience refreshing airflow during rest breaks, pit stops, or even while camping. Say goodbye to sweaty discomfort and hello to a more enjoyable journey.

Durability And Reliability

The Under Dash Standalone Split Electric Cooling Unit is built to last. Its durable construction ensures longevity, and its reliability guarantees consistent performance, making it a wise investment for your vehicle’s cooling needs.

These features collectively make the Under Dash Standalone Split Electric Cooling Unit a reliable and efficient solution to keep you cool and comfortable on the road, regardless of the weather conditions outside.

About Specialised Parts

At Specialised Parts, we understand the importance of having a reliable and efficient cooling system for your vehicle. As a professional converted VW-running Subaru drivetrain parts manufacturer, we specialize in providing high-quality components and expertise to enhance your driving experience.

Our experienced team provides Under Dash Standalone Split Electric Cooling Units for your vehicle to ensure optimal performance and functionality. If you have any concerns or queries, contact us today!

Seamless Oil Level Monitoring Made Easy With The Subaru Oil Level Sight Glass

Seamless-Oil-Level-Monitoring-Made-Easy-With-The-Subaru-Oil-Level-Sight-Glass

Regular maintenance is key to ensuring the longevity and optimal performance of your modified vehicle’s manual transmission. One crucial aspect of maintenance is maintaining the proper oil level.

However, checking the oil level in a modified Subaru 5 Speed or 6 Speed cable shifting manual transmission has traditionally required pulling out the dipstick, this is not possible due the the elimination of the dipstick in the modification process.

Therefore, as a professional converted VW running Subaru drivetrain parts manufacturer , we are offering the Subaru Oil Level Sight Glass as a convenient solution, allowing you to check the oil level in an instant.

In this blog post, we’ll explore the features and benefits of this innovative product. But first, let’s discuss some basics.

What Is An Oil Level Sight Glass?

An oil-level sight glass is a small transparent window or glass tube that is installed in a specific location within a mechanical system, allowing for the visual inspection of fluid levels.

In the context of modified automotive transmissions, an oil level sight glass is specifically designed to provide a convenient way to check the oil level in an instant without having to drain all the oil and measure the quantity.

Also Read: How Rooftop Air Conditioning Systems Improve Vehicle Energy Consumption?

The Key Features Of A Subaru Oil-Level Sight Glass

When it comes to monitoring the oil level in your modified Subaru 5 Speed or 6 Speed cable shifting manual transmission, the Subaru Oil Level Sight Glass stands out as an exceptional product.

Our sight glass offers convenience, durability, and reliability.

Let’s delve into the key features that make the Subaru Oil Level Sight Glass a must-have component for transmission maintenance.

Custom-Designed Fitting

The Subaru Oil Level Sight Glass has a custom-designed fitting that seamlessly integrates into your modified Subaru transmission. This precise fitting ensures a secure and proper installation, eliminating any concerns about compatibility or functionality. By choosing a sight glass specifically tailored to your modified Subaru transmission, you can be confident in its performance and accuracy.

Clear Sight Glass

The sight glass itself is designed to provide a clear view of the oil level inside the transmission. Made from high-quality materials, it offers excellent transparency and resistance to heat, vibrations, and other environmental factors. The clear sight glass enables you to visually inspect the oil level at a glance, ensuring easy monitoring of the oil level and its condition.

Easy Installation Process

Installing the Subaru Oil Level Sight Glass is a straightforward process. With the custom-designed fitting, you can easily replace the existing component in your modified Subaru transmission without the need for complicated modifications or additional tools. The user-friendly installation ensures that you can quickly and efficiently add this upgrade to equip your vehicle with this essential monitoring tool.

Durable And Resilient Construction

The Subaru Oil Level Sight Glass is engineered with durability in mind. It is constructed from robust materials that resist heat, vibrations, and mechanical stress to withstand the demanding conditions under the hood of a vehicle. This rugged construction ensures that the sight glass remains reliable and functional, providing long-lasting performance for your transmission maintenance needs.

Accurate Oil Level Monitoring

With the Subaru Oil Level Sight Glass, you can achieve precise oil level monitoring. By visually inspecting the oil level directly through the clear sight glass, you can obtain accurate readings without any guesswork. This accuracy allows you to make informed decisions regarding your transmission’s maintenance, ensuring optimal performance and longevity.

Enhanced Safety And Convenience

The Subaru Oil Level Sight Glass enhances safety and convenience during your transmission maintenance routines. The effortless monitoring process saves you time and effort, making transmission maintenance a hassle-free task.

Warranty Coverage

To provide you with peace of mind, we offer a comprehensive warranty on our Subaru Oil Level Sight Glass. All wearing parts are covered by a 1-year (12-month) parts replacement warranty, ensuring that you receive a high-quality product. Additionally, fixed/non-wearing parts are backed by a lifetime warranty, underscoring our commitment to durability and customer satisfaction.

About Specialised Parts

Specialised Parts is a professional converted Volkswagen running Subaru drivetrain parts manufacturer. We have plenty of experience in providing a wide range of parts for rebuilt Subaru engines and specialised parts for your converted/modified Subaru-powered Volkswagen.

Looking for high-quality parts, such as the Subaru Oil Level Sight Glass, contact us today.

Ready To Shop Our VW & Subaru Conversion Automotive Parts?

(403)-618-3946

Shop Now
call-to-action
Select your currency
USD United States (US) dollar